DATA SPLIT Technical data

DESCRIPTION	DATA SPLIT
Primary
Nominal primary supply temperature	80°C
Maximum primary supply temperature	95°C *
Minimum primary supply temperature	55°C **
Maximal primary differential pressure (without dP regulator)	250kPa
Maximal primary differential pressure (with dP regulator)	450kPa
Minimal primary differential pressure	50kPa ***
Pressure class DH circuit	PN16
Domestic Hot Water
Nominal DHW supply temperature	55°C
DHW Set Range	45°C to 60°C
Domestic Hot water heat exchanger (DHW)	E8LAS‐40
Pressure class DHW circuit	PN10
Central Heating
Return Temp Limit Range	35°C to 65°C
CH Limit Range	30°C to 80°C
Central heating heat exchanger (CH)	E8LAS‐40
Pressure class CH circuit (3 bar safety valve)	PN10
CH Maximum working pressure	2.5 Bar
General
Primary connections	¾” Female / 18mm
Mains & DHW connections	¾” Female / 18mm
Central heating connections	¾” Female / 18mm
Pressure relief	15mm
Casing width	490mm
Casing height	640mm
Casing depth	275mm
Casing Material	EPP Expanded Polypropylene
Maximum Heat Losses	50W (1.2 kWh/day)
Typical Heat Losses (DHW Only, Keep Warm)	25W
Weight (basic version)	24kg ****
Electrical supply info	230V 50Hz
Fuse ratings	3 Amp
Sensor DHW	NTC 10kohm @ 25°C
Keep Warm Modes	Economy / Comfort
Max Return Temperature during Keep Warm Mode	DHW Setpoint -2°C

.* Maximum primary supply temperature 100°C for momentary spikes.
.** Minimum required DH supply temperature is DHW setpoint + 5°C with a minimum of 55°C.
.*** Depends on requested DHW output and available DH supply temperature.
.**** Unit weight may vary depending on the optional components built into the unit