Sensor Positioning for Pneumatic System

From Heatweb Wiki
Revision as of 00:57, 2 February 2016 by Rhg (talk | contribs) (Created page with "When installing or replacing the pellet level sensors used on the pneumatic pellet delivery options for MCZ appliances, ensure that the sensor is fitted in the correct orienta...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

When installing or replacing the pellet level sensors used on the pneumatic pellet delivery options for MCZ appliances, ensure that the sensor is fitted in the correct orientation.

The writing on the sensor and the attached data label must be upright, as per the picture below:

Pellet level sensor installed in correct orientation
Retrieved from "http://heatweb.co.uk/w/index.php?title=Sensor_Positioning_for_Pneumatic_System&oldid=1008"